ob电竞体育正规登陆
Vertical reach | 35.20 m |
Concrete output | max. 161 m 3 /h |
Pressure on concrete | max. 85 bar |
The SCHWING S 36 X Efficient and reliable
Outstanding reliability and high performance have been the hallmarks of the SCHWING S 36 X truck-mounted concrete pump for decades, making it a proven companion on construction sites all over the world. SCHWING manufactures the robust steel structure using steel from the leading manufacturers in Western Europe. The S 36 X offers lasting reliability and excellent retention of value, last but not least because SCHWING steered well clear of experiments with the pump’s design. The open hydraulics system with the generously dimensioned SCHWING hydraulics components delivers impressive fuel efficiency and high pumping performance. The hard-wearing and easy to maintain ROCK-valve also helps with keeping costs low and income high. The SCHWING S 36 X: Efficient and reliable concrete pumping.
The S 36 X from SCHWING
Advantages and benefits at a glance

Bom
The turret can be rotated 365° in either direction and the tip section can rotate 238° meaning that even the most demanding placement situations can be mastered effortlessly. And the robust construction ensures a long service life.

Pump kit
The ROCK and the differential cylinders are switched fully hydraulic via the SCHWING control block. This ensures outstanding reliability even in difficult operating conditions and makes servicing the system a breeze.

Concrete valve
Thanks to its intelligent design, the ROCK valve suffers significantly less wear and tear than other concrete valves. It is also quick to clean and is demonstrably easier to maintain. The advantages for the S 36 X: shorter servicing times, higher machine uptime and lower maintenance costs.

Supply control
The water box can be filled and emptied, and the water pump, agitator, spray hose, high pressure cleaner and compressor, all controlled via the standardised supply control. This is the standard for all SCHWING truck-mounted concrete pumps for greater clarity and ease of operation.

Outriggers
The unique combination of front X and rear H outriggers results in a uniquely small footprint. The support legs are optimally equipped for the daily life on the building site - thanks to the protected piston rods and internally laid hydraulic lines.

Hinged sidewall
The 3.20 metre long hinged sidewall comes as standard and features integrated hose / tube mounts. It provides safe and easy storage for hoses, tubes and other accessories on the go. A hinged sidewall with an extended length of 5.00 metres is available as optional equipment.

Remote control SC 30
The light weight, easy to use and comfortable SC 30 helps minimise fatigue, allowing the operator to focus on the job for extended periods. The powerful batteries guarantee an operating time of at least 8 hours.

Open hydraulic system
The S 36 X open hydraulic system converts the engine power efficiently into pump power with little loss. Thus, the usual practice output rates can be realized with a fuel-saving engine speed of just over 1000 rpm.

VECTOR control
The machine operator can inspect machine data, operating conditions and settings on S 36 X, changing various parameters, all through the intuitive VECTOR control. The integrated diagnostic system ensures safe operation and also reminds the operator when maintenance is necessary.
Outstanding reliability and high performance have been the hallmarks of the SCHWING S 36 X truck-mounted concrete pump for decades, making it a proven companion on construction sites all over the world. SCHWING manufactures the robust steel structure using steel from the leading manufacturers in Western Europe. The S 36 X offers lasting reliability and excellent retention of value, last but not least because SCHWING steered well clear of experiments with the pump’s design. The open hydraulics system with the generously dimensioned SCHWING hydraulics components delivers impressive fuel efficiency and high pumping performance. The hard-wearing and easy to maintain ROCK-valve also helps with keeping costs low and income high. The SCHWING S 36 X: Efficient and reliable concrete pumping.
Performance | ||||||
---|---|---|---|---|---|---|
Pump kit | P2023-110/75 | P2023-110/75 | P2023-110/75 | P2025-120/80 | P2025-120/80 | |
Drive | l/min | 380 | 535 | 636 | 535 | 636 |
Delivery cylinders | mm | 230 x 2,000 | 230 x 2,000 | 230 x 2,000 | 250 x 2,000 | 250 x 2,000 |
Concrete output max. | m3/h | 98 | 136 | 161 | 136 | 161 |
Pressure on concrete max. | bar | 85 | 85 | 85 | 85 | 85 |
Stroke rate max. | 1/min. | 20 | 27 | 32 | 23 | 27 |
Concrete valve |
M-ROCK
(Option: B-ROCK) |
M-ROCK
(Option: B-ROCK) |
M-ROCK
(Option: B-ROCK) |
B-ROCK | B-ROCK | |
Hydraulic system | ||||||
Design | open system | |||||
Hydraulic tank | l | 370 | ||||
Boom | 36 R | |||||
Delivery line | DN 125 | |||||
Length of end hose | m | 4.00 (Option: 1.00 + 3.00) | ||||
Vertical reach | m | 35.20 | ||||
Reach depth | m | 24.00 | ||||
Horizontal reach | m | 31.25 | ||||
Net horizontal reach | m | 28.62* (from front bumper) | ||||
Number of boom sections | 4 | |||||
Height of the inflexion points | m | 4.00 / 12.40 / 20.10 / 27.90 | ||||
Slewing range | 2 x 365° | |||||
Folding height | m | 8.32 | ||||
Support | ||||||
Outrigger width, front | m | 6.21 | ||||
Outrigger width, rear | m | 5.70 | ||||
Outrigger load, front | kN | 190 | ||||
Outrigger load, rear | kN | 150 | ||||
Chassis examples**) | Mercedes-Benz Arocs 2740 | MAN TGS 26.360 | ||||
Axles configuration | 6x4 | 6x4 | ||||
Wheelbase | 4,200 | 4,200 | ||||
Length | 11,205 | 11,235 | ||||
Miscellaneous | ||||||
Water tank | l | 420 |
*depending on the chassis **other chassis possible